Part Number Hot Search : 
SF25I PT6923 ULN2086A 23000 04P5X KIA6035P R1515H NTE1828
Product Description
Full Text Search
 

To Download IA6008-CA11A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 IA6008-CA11A
Contact image sensor heads
Color image sensor heads for multi-function
IA6008-CA11A
The new compact full color contact image sensor heads are world's smallest in its class and designed to minimize the size and weight of the scanner. The sensor chip used for the CIS is produced with the proprietary technologies of ROHM LSI circuit design and accumulated manufacturing technology of monochrome devices. This product has an excellent color reproduction capability with the high level of noise immunity with the ultra small package. It operates on 3.3 volts power supply.
Applications Image sensor heads device for multiple function facsimiles such as color scanner and multiple function printer.
Features 1) Signal amplifier is built in to the image sensor IC in order to increase immunity to external noise. 2) Additionally, newly developed analog memory circuit and realizes high speed scanning. 3) The LED light source is mounted on the same substrate as the sensor chip which makes it possible to package the device with lighter weight and an extremely small size. 4) With the proprietary prism, the output signal is maintained uniformly. 5) The ceramic substrate is used for excellent dimensional accuracy and thermal stability.
External dimensions (Unit : mm)
Paper feeding direction
2360.2 (1.8) 210(Effective Reading Width)
50.20
C L
Effective 1st bit
12.80.5 1mm pitch 12pin
10.60.3
A
ROHM
Max. 1.5
(15.5) (25) 2-R1.5 Effective Depth 2
5.30.2
No.12
14.90.2
No.1
Note) Deflection at the top of A faces : 0 to 0.25
Pin No. No.1 No.2 No.3 No.4 No.5 No.6
Signal Ao GND GND VDD VREF SP
Pin No. No.7 No.8 No.9 No.10 No.11 No.12
Signal CLK V-LED B-GND G-GND R-GND N.C.
13.4 + 0.5 -
181.15
28.85 + 0.05 - 0.25
19.050.2
1/4
IA6008-CA11A
Contact image sensor heads
Characteristics
Parameter Effective scanning width Primary scan dot density Total dot number Power supply voltage Reference voltage Scanning speed Clock frequency Maximum dynamic range Minimum dynamic range Dark output Operating temperature Symbol - - - VDD VREF SLT CLK VRMax VRMim. Vod - 600 5148 3.3 0.8 5.1 3.3 0.75 0.375 Vref + 0.1 - 5 to 45 Typ. Unit mm dpi dots V V ms / line MHz V V V C
Pin assignments
No. 1 2 3 4 5 6 7 8 9 10 11 12 Circuit AO GND GND VDD VREF SP CLK V-LED B-GND G-GND R-GND NC I/O O I I I I I I I I I I - Function
Analog output Ground Ground Power supply
Reference voltage Start pulse Clock LED power supply BLUE LED ground GREEN LED ground RED LED ground -
2/4
IA6008-CA11A
Contact image sensor heads
Timing chart (a) CLK Timing Chart
1/fCLK twH twL
50% 50%
CLK
50%
50%
SP
tSETUP tHOLD ts
Ao
1pixel 2pixel
(b) Data Output Timing Chart After turning on the SP pulse, the analog output starts from the setting up point of 64 clock pulse.
0
1
51 52 53
63 64 65
CLK SP Ao
Vref output period(51pixels)
1
Vdummy 52 to 63pixels
Analog output period 64 to 5211pixels
1 to 51pixels
Note)The CLK section area which is over the effective pixel numbers (Output blank part) cannot be used as the analog Output standard level. 1 VREF output period is defined by the peripheral circuit in the next page.
3/4
IA6008-CA11A
Contact image sensor heads
Circuit diagram
VDD
1Fx12 1 5148
GND
SP
ANALOG MEMORY CIRCUIT
CLK
VDD VREF
AO VREF
1Fx2
VLED
RGND GGND BGND
Peripheral circuit
CIS UNIT
12 9 10 11 8 1 5 4 6 7 3 2 R3 R2 B G R A VDD C3 NC C2 SP CLK GND C1 R1 C5
LED GND
C4 VLED
VREF
GND
R1=R2=100, R3=100K C1=C2=47F C3=100F, C4=0.1F, C5=100pF
4/4
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0


▲Up To Search▲   

 
Price & Availability of IA6008-CA11A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X